Used 112 Cubic Feet Stainless Steel Paul Abbe Rota-Cone Blender, Model 84, 84" diameter, rated 80 lbs. / 112 cubic feet maximum material density, stay bolt jacketed shell rated 30 PSI at 275 degrees F, with liquid injection, 16" feed, 12" discharge with butterfly valve, 20 HP 575 volt XP motor drive with brake on stands, Serial No. A19530, National Board No. 224.

Used 55 Cu Ft Paul O. Abbe Rota-Cone SS Double Cone Blender. Model RCB-66. 304 Stainless Steel. Non-jacketed shell 66" diameter x 25" straight side x 45 degree cones. 16" Diameter inlet, 10" diameter outlet. Shell driven by an approximate 10 HP, 3/60/480 volt gear motor, ratio 14.46 to 1. Mounted on a carbon steel frame. Serial # A45562. Built 1995.

Used 45 cu. ft. SANITARY STAINLESS STEEL DOUBLE CONE BLENDER. 45 cu. ft. full capacity, 29 cu. ft. working capacity. 54 inch inside diameter x 16 inch with 24 inch cones. 14 inch inside diameter top inlet with lid. 8 inch bottom outlet with valve. 5 HP gear motor with 155 rpm output, 230/460 volt, 3 ph. Has Stearns brake on motor. To be reassembled on stand. Built by Paul O Abbe, compares to model RCB-29. Last used in a sanitary application, polished finish inside

New 35 Cu Ft Food Grade Polished 304 Stainless Steel Paul O. Abbe Ribbon Blender. Model # RB-35 Ribbon Blender. 20 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 41 rpm. 35 Cubic Foot working capacity. 39 Cubic Foot total volume. All stainless steel construction. Trough dimensions: Approximately 33.4 inches wide x 59.1 inches long x 37.4 inches deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 2Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 19.7 inches wide x 31.5 inches long. Approximate 4.7 inches wide x 14.2 inches flush air operated plug valve. Discharge housing is approximate 18.5 inches wide x 24 inches long. Approximately 24 inches discharge height. Approximate weight 2,860 pounds. Approximate overall dimensions: 52.7 inches wide x 107.5& inches long x 84.3 inches high. Controls are available upon request. (4) available.

Used 2.5 Cu Ft Paul O. Abbe Rota-Cone Blender. Plastic Drum. 2.5 Cubic feet working capacity (3.9 total). 24" Diameter body with cones, 11" Diameter top charge & discharge port with cover. Driven by a 1/2hp, 3/60/230/460 volt, 1725 rpm motor. Mounted on carbon steel stands. Serial# A22078.