Used 427 Cubic Foot Stainless Steel Double Cone Blender. 9'-6" dia. cone. 220 Cu Ft Working Volume. Half cone height is approx 53". 39" straight side. 45° cone. Current height = 13'-9". 90" high pedestals. Pedestal footprint is approx 14' wide x 16' deep. 10" dia flanged outlet. Housing is constructed of 304 stainless steel. Gear drive with guard.

Used 250 Cu Ft Stainless Steel Slant cone mixer. 9' diameter X 36" straight side, 54" high top cone, 60" high bottom cone. Shell includes 18" diameter feed opening (less cover) and 12" diameter discharge with butterfly valve. Driven by approx. 25 HP motor. Shell is unitized on carbon steel A-frame stand with pillow block bearings and gear & sprocket drive assembly. Previously used at nutraceutical manufacturing facility. (No nameplate - believed to be Gemco).

Used Continuous Paddle Mixer, approx. 100 cu. ft. capacity, jacketed chamber, measures 4' diameter x 9' long, stainless steel chamber with stainless steel paddles. Includes (4) rows paddles, (26) paddles total, 10" x 5" x 1-3/4" thick. Paddles are fixed to 6" diameter cored center shaft for heating, mild steel shaft. Driven by 125 HP, 1785 RPM, 230/460V, 3/60Hz motor thru V-belt drive. Includes rotary steam joint & hydraulic ram to open/close front section of mixing chamber. Manufactured by Con-Vey systems. Previously mixing wood fiber and resin together. Paddles rotate in counter clockwise rotation. Most paddles are at 40-45 degree angle to convey product towards end, end paddles are turned to 0-10 degree to push material out back on right hand side of blender. In good working condition when taken out of service. (Qty - 2 available)

NEW 100 Cu Ft 304 Sanitary Stainless Steel Ribbon Blender. 30 HP, 220/440V-3 Ph, TEFC Motor and Gearbox. 25 RPM Ribbon speed. Heavy duty chain driven with guard. 180 grit buffed and polished interior. 304-SS Dual Lid and Grate with safety limit switch. 8" Center mounted discharge with Pivot style gate. 5" SS Shaft. Split ring Seals w/ Air purge. Sidewall thickness: 5MM. Trough size: 96"L x 46"W x 51"H. (OAL: 127"L x 55.5"W x 87"H). Carbon Steel legs with epoxy coating. Discharge height to floor: 30.5". Comes with 1 year warranty against manufacturer defects.

Used 80 Cu.Ft. Areco Ribbon Blender, stainless steel construction, 40" Wide x 96" Long trough, Double ribbon, outboard roller bearings, packing glands, provisions for (2) high speed choppers No choppers 8" center bottom outlet with 20HP Gearhead motor, chain and sproket driven with covers on legs with 102" discharge height.

Used 75 cubic foot Stainless Steel Ribbon Blender with 30 HP drive. Sanitary design - polished stainless steel material contact surfaces with bottom-center discharge (10" flanged). Base frame is constructed of mild steel. Mix chamber dimensions: 40" wide X 96" long X 46" depth. Full top cover with bag-breaking station (removable grating and hinged cover). 30 HP Gearmotor drive will require 230/460V, 60Hz, 3 phase AC power. Inline speed reducer with 14:1 ratio. Overall dimensions (excluding drive): 45"W X 135"L X 60"H .

NEW 75 Cu Ft 304 Sanitary Stainless Steel Ribbon Blender. 561 Gal Working capacity. 25 HP, 220/440V-3 Ph, TEFC Motor and Gearbox. 32 RPM Ribbon speed. Heavy duty chain driven with guard. 180 grit buffed and polished interior. 304-SS Dual Lid and Grate with safety limit switch. 8" Center mounted manual Pneumatic Sliding Gate. 4.5" SS Shaft. Split ring Seals w/ Air purge. Sidewall thickness: 5MM. Trough size: 86"L x 42"W x 47"H. (OAL: 114"L x 51.5"W x 81"H). Carbon Steel legs with epoxy coating. Discharge height to floor: 26". Weight: Approx 3950 lbs. Comes with 1 year warranty against manufacturer defects.

Used 50 Cu Ft Stainless Steel Nauta mixer. 6'D x 8'L cone with 10" Center bottom outlet. Auger driven by 10 HP motor. 2Hp agitator arm drive top mounted. Control panel runs mix mode, discharge, nauta screw and arm. Lug mounted.

Used 50 cu ft carbon steel paddle blender. 20 HP drive through gear reducer. Closed top with 20" x 20" hinged hatch. Outer ribbon is 40" in diameter with a 3" diameter shaft. Mixing chamber is 72" long x 40" wide x 53" deep for a total volume of 80 cu ft. Overall Height with legs is 82". Has a 3.5" center discharge. Last mixing 4500 lbs of product. Requires 230/460V, 3 ph electrical supply.

Used approximately 50 cubic foot working capacity stainless steel double ribbon blender. Approximately 30" wide X 120" long X 34" deep. 20 HP Motor with reducer to belt drive. 208/220-440 volt 1750 rpm motor. 2 bottom outlets with slide gate valves. Lid Missing. Requires cover.

NEW 50 Cu Ft 304 Sanitary Stainless Steel Ribbon Blender. 374 Gal Working capacity. 15 HP, 220/440V-3 Ph, TEFC Motor and Gearbox. 39 RPM Ribbon speed. Heavy duty chain driven with guard. 180 grit buffed and polished interior. 304-SS Dual Lid and Grate with safety limit switch. 6" Center mounted manual Pivot style Gate. 4" SS Shaft. Split ring Seals w/ Air purge. Sidewall thickness: 4MM. Trough size: 78"L x 36"W x 39"H. (OAL: 104"L x 45.5"W x 77"H). Carbon Steel legs with epoxy coating. Discharge height to floor: 29.75". Weight: Approx 3600 lbs. Comes with 1 year warranty against manufacturer defects.

NEW 50 Cu Ft 304 Sanitary Stainless Steel Ribbon Blender. 374 Gal Working capacity. 15 HP, Direct Drive, 220/440V-3 Ph, TEFC Motor. 44 RPM Ribbon speed. 180 grit buffed and polished interior. 304-SS Dual Lid and Grate with safety limit switch. 6" Center mounted Butterfly valve. 3.785" SS Shaft. Split ring Seals w/ Air purge. Sidewall thickness: 4MM. Trough size: 78"L x 36"W x 38.5"H. (OAL: 97"L x 51"W x 80"H). Stainless Steel legs. Discharge height to floor: 33". Weight: Approx 2525 lbs. Comes with 1 year warranty against manufacturer defects.

New 35 Cubic Foot Working Capacity Stainless Steel Double Ribbon Blender. Features 304 Stainless Steel Construction (mirror finish ribbons), pneumatic flap discharge, safety sensors, control panel, and Teflon Air Seals. Capacity 1000 Liters. Electrics: 20 HP Motor, 220 Volts/3PH/60 HZ, 15Kw, up to 62 RPM. Trough Measurements: 60 Inches Length x 36 Inches Depth. Overall Dimensions: 77 Inches Length x 45 Inches Width x 78 Inches Height. Floor to Discharge: as per customer specifications. Unit manufactured in China. Delivery Time: 7-8 weeks from receipt of 65% Deposit. Shipping, customs fees, duties, taxes extra.

New 35 Cu Ft Stainless Steel Ribbon Blender. 304 Stainless Steel. 15HP TEFC 220/440V, 3ph motor with chain drive 35RPM. 6" center discharge with pivot gate. (2) SS Lids, (2) safety grates. Split ring seal with air purge. Overall dimensions: 90"L x 45"W x 72"H.

New 35 Cu Ft Stainless Steel Ribbon Mixer. 304 Stainless Steel. 15 HP TEFC motor and direct drive gearbox. Center 5" discharge with butterfly valve. 3" Solid SS 3.375" Main shaft. (2) SS Lids, (2) safety grates. Overall dimensions: 91"L x 45"W x 75"H.

New 30 Cu Ft Working Capacity Stainless Steel Twin Shell Mixer with Intensifier Bar. The shell and frame are constructed of 304 Stainless Steel. Mirror polished 304 S/S mixing vessel & housing. Includes Safety Sensor Gates. Specifications: -Mixer Capacity: 1500 liters. -Total Mixing Volume: 900 Litres. -Maximum Mixing Weight: 630Kg. -Single rotation speed: 12 rpm. -10” Diameter Butterfly Discharge. -Weight: 725 Kg or 1,600 pounds. -Overall Dimensions: 126”L x 63”W x 118”H. -Electrics: Total Power is 5.5KW (mixing motor)+ 3KW (cone rotate power) = 8.5KW, 3Ph/60Hz/220V. -Includes Limited Warranty. Unit built in China. Delivery: 10-12 weeks from receipt of 65% deposit.

Used Nauta style mixer, approx. 25 cu. ft. capacity, stainless steel construction, urethane-lined, 48" diameter at top of cone, 72" deep, leading to 10" diameter outlet, includes manual slide gate and rotary airlock valve. Top head includes dual drive assembly to rotate Nauta mixing arm and screw. Bolted top lid with top feed opening. Mounted on carbon steel frame. Appears to be in good condition.

NEW 25 Cu FT 304-SS Ribbon Blender. 10 HP TEFC Chain Drive motor, 220/440V,3ph,60hz. Output 45 RPM. 3" SS Shaft. Split ring seal w/ air purge. Trough: 58"W x 29"W x 32"H , 4mm thick. All surface welds ground, buffed and polished to 180 grit or better, meeting sanitary specifications. SS Lid and safety gate. 6" center discharge with pivot style gate valve. Carbon Steel legs. Discharge shroud to floor: 35". Overall: 80.5"L x 36.5"W x 75"H.

New 25 cu ft 304 Stainless Steel Jacketed Double ribbon blender. Sanitary 304 SS with mirror finish ribbons. 20 HP motor. 12" center bottom butterfly discharge. 25" Floor to discharge. SS Lid with safety grate. Overall Dims: 82"L x 47" W x 79"H.

Emulsion Skid, Includes 20 hp Emulsifer Pump, with Baldor 1765 RPM Motor, 208-230/460 Volts, 3 Phase, with S/S Flash Tank, with APV S/S Plate Heat Exchanger, M/N HXCS-6, S/N 2593-9435, with Aprox. (18) S/S Plates, with Selector Vacuum Pump with Circulating Valving, with Skid & Platform (LOCATED IN CHAMPAIGN, IL)

Emulsion Skid, Includes 20 hp Emulsifer Pump, with Baldor 1765 RPM Motor, 208-230/460 Volts, 3 Phase, with S/S Infeed Flash Tank, Mounted on S/S Skid & Platform, with S/S Side Mounted Control Panel (NOTE: Does NOT Includes Digitial Read Outs Associated with Other Lots) (LOCATED IN CHAMPAIGN, IL)

Used 20 hp Emulsifier, with Baldor 1765 RPM Motor, with S/S Vertical Flash Tank, 208-230/460 Volts, 3 Phase, with Skid & Platform

Used 20 Cubic Foot Stainless Steel Ribbon Blender. Blending Chamber Dimensions: 40" L x 32" W x 34" Deep. 32" Dia. x 1/2" Thick Single Shaft Ribbon. Manual Opening Cover. (2) 1.5" Intensifier Bars. 15 HP Elektrim Motor: 230/460 Volt, 3 Phase, 1750 RPM, Frame: 254TC.

New 20 Cu Ft Working Capacity Stainless Steel Twin Shell Mixer with Intensifier Bar. The shell and frame are constructed of 304 Stainless Steel. Includes Safety Sensor Gates. Mirror polished 304 S/S mixing vessel & housing. Specifications: -Mixer Capacity: 1000 liters. -Total Mixing Volume: 600 Litres. -Maximum Mixing Weight: 420Kg. -Single rotation speed: 12 rpm. -10” Diameter Butterfly Discharge. -Weight: 600 Kg or 1,300 pounds. - Overall Dimensions: 110”L x 57”W x 106”H. -Electrics: Total power is 3KW (mixing motor)+ 4KW(cone rotate power) = 7KW, 3Ph/60Hz/220Volts. -Includes Limited Warranty. Delivery Time: 8-10 weeks from receipt of order and 65% deposit.

USED 20 CUBIC FOOT 304 STAINLESS STEEL TWIN SHELL BLENDER. APPROX 5 HP MAIN DRIVE, APPROX 2 HP INTENSIFIER BAR. 8" BUTTEFLY BOTTOM DISCHARGE. WITH COVERS. (NO NAMPLATE, NEEDS NEW BEARINGS)

New 20 Cubic Foot Stainless Steel Double Ribbon Blender. Features 316 Stainless Steel Construction, pneumatic discharge door, control panel. Capacity 500 Liters.(Effective Volume 17.7 Cu Ft) Electrics: 7.5 HP Motor, 230 or 460V/3PH/60 HZ. Overall Dimensions: 65” Length x 37” Width x 70” Height. Delivery: 5-7 weeks from receipt of 65% Deposit. (Additional Sizes from 5-50 Cu ft available). Shipping, customs fees, duties, taxes extra.

Used 19 cubic foot stainless steel ribbon blender. Double ribbon, interrupted. Ribbon 1/4' wide x 1.5". 24" wide X 6' long X 27" deep. 6" Center bottom discharge outlet. 2 Piece Hinged cover. On stand. Dual cycle motor, 15 HP, 3 phase 60 cycle 230/460V, 15 HP, 50 cycle 200/400V, 1455 rpm. Needs new gear train. Includes platform.

Used 18 Cu Ft Stainless Steel Double Ribbon Blender. 316 SS. 10 HP motor with Chain Drive.

New 10 Cubic Foot Working Capacity Stainless Steel Double Ribbon Blender. Features 316 Stainless Steel Construction, manual flap discharge, control panel. Capacity 300 Litres. Electrics: 3 HP Motor, 220 Volts/3PH/60 HZ. Trough Measurements: 40 Inches Length x 25 Inches Depth. Overall Dimensions: 55 Inches Length x 31 Inches Width x 60 Inches Height. Floor to Discharge: as per customer specifications. Includes Limited Warranty and Manual. Unit made in China. Delivery Time: 6-10 weeks from receipt of a 65% Deposit. Shipping, customs fees, duties, taxes extra.

New 10 Cu Ft Working Capacity Stainless Steel Twin Shell Mixer with Intensifier Bar. The shell and frame are constructed of 304 Stainless Steel. Includes Safety Sensor Gates. Specifications: Mixer Capacity: 500 liters. Total Mixing Volume: 300 Litres, Maximum Mixing Weight: 210Kg. Single rotation speed: 12 rpm, mirror polished 304 S/S mixing vessel & housing. Weight: 620 Kg or 1,364 pounds. Overall Dimensions: 102”L x 41”W x 82”H. Electrics: Total power is 2.2kw(mixing motor)+2.2kw(cone rotate power) = 4.4KW, 3Ph/60Hz/220Volts. Delivery Time: 8 weeks from receipt of 65% deposit. Unit manufactured in China.

Used approximately 10 cu ft stainless steel ribbon blender. Double ribbon. Stainless steel contacts. Carbon steel jacket. Built by Howes. S/N: 108910. Center bottom outlet with manual valve. Hinged lid with counter weights. Past use: masonry coatings.

New 6 Cu. Ft. Stainless Steel V-Blender with Intensifier Bar. The shell and frame are constructed of 304 Stainless Steel. Includes Safety Sensor Gates. Specifications: Mixer Capacity: 300 liters. Total Mixing Volume: 180 Liters, Maximum Mixing Weight: 125 Kg. Single rotation speed: 12 rpm, mirror polished 304 S/S mixing vessel & housing. Weight: 550 Kg or 1200 pounds. Overall Dimensions: 84”L x 30”W x 76”H. Electrics: Total power is 1.1kw(mixing motor)+1.5 KW(cone rotate power) = 2.6 KW, 3Ph/60Hz/220Volts. On Casters. Delivery Time: 8 weeks from receipt of 65% deposit. Unit made in China.